Je vends un préampli Emotiva UMC-1 et un amplificateur 5 canaux UPA-5 de la même marque, comme neuf et en parfait état de fonctionnement avec carton d'emballage d'origine.
Descriptif technique UMC-1 :
* Twin Cirrus® 32 bit dual core DSP’s
* Decoding support for Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Digital True HD, Dolby PLIIx, DTS, DTSES, DTS HD, DTS Master Audio, DTS Neo 6, SPDIF, PCM 8 channel (note: some audio formats are only supported via HDMI)
* Multi-channel Dolby Volume
* Genesis/ST® Torino high performance scaling engine - featuring a full implementation of the Faroudja DCDi™ image processing suite
* Intuitive, full color graphical OSD with adjustable transparency presented over live video, including HDMI
* Emo-Q™ automatic multi-channel room correction and loudspeaker setup. Calibrated measurement microphone included.
* Quadruple bass manager with independently selectable high and low pass frequencies from 40hz – 250hz, in 5 or 10Hz increments (depending on frequency)
* Selectable 12db or 24db per octave high pass and low pass filters by channel groupings
* Independent 11-band graphic EQ with global bass and treble controls by channel groupings
* Balanced subwoofer output
* All legacy video inputs can be scaled and output over HDMI at up to 1080p
* 1080p/24 fps video support
* Video pass-through mode with 12 bit compatibility
* HDMI sources can be format converted to component video up to 1080i (subject to Macrovision™ guidelines)
* HDMI 1.3a Deep Color compliant
* All inputs are assignable and feature input labeling, selectable decode modes, selectable triggers, etc.
* 0.5dB level trims on all channels
* High voltage, low impedance main analog outputs for uncompromised dynamic headroom
Connectique :
* 5 - HDMI inputs and 1 HDMI output.
* 3- composite video inputs (RCA)
* 3 - S-video inputs (S-video mini DIN)
* 3 - component video inputs (RCA)
* 1 - component video output (RCA)
* 4 - stereo analog audio inputs (RCA)
* 1 - 7.1 analog input set (RCA)
* 1 - 7.1 analog output set (RCA)
* 4 - coaxial digital inputs, (RCA)
* 3 - optical digital inputs (Toslink)
* 1- coax digital audio output (RCA)
* 1- optical digital audio output (Toslink)
* 1 - Stereo or 2 channel analog multi channel mix down output for fixed level monitoring (RCA)
* 1- stereo analog variable and independent Zone 2 output (RCA)
* 1 - stereo analog fixed level record output (RCA)
* High performance AM/FM tuner with 24 FM and 6 AM presets
* 3 - assignable trigger outputs Movie/Music/Amp (3.5mm mini)
* 1- IR input (3.5mm mini)
* 1 - IR output (3.5mm mini)
* 1. Microphone input (3.5mm stereo mini)
* 1- USB data input (for software upgrades only)
* Size: 17” W x 3 7/8” H x 13” D
Description générale UPA-5 :
Amplificateur 5 canaux
* Gain: 32db
* Ratio S/B 1 watt: 119db Pleine puissance: 116db
* Impédance d’entrée: 23.5kohms
* Transformateur : 600VA
* Capacités secondaires: 60,000uF
* Transistors de sortie : 4 par canal
* Topologie : Fully Discrete, Dual Differential, High Current, Short Signal Path Classe A/B
* Dimensions : Unboxed: 17" wide x 7.75" high x 19" deep
Boxed: 23.25" wide x 11.5" high x 24.5" deep
* Puissance (tous canaux alimentés) 185 watts RMS @ 4 ohm (0.1% THD) 125 watts RMS @ 8 ohm (0.1% THD)
* Réponse: 20 Hz to 20 kHz avec moins de .05db de déviation à la puissance annoncée
* Réponse en fréquence sur toute la bande (‐3db): 5Hz to 150kHz
* Poids : 29Kg (35.5kg emballé)
Tourne actuellement avec deux RF82 et une RC64 Klipsch avec une source PCHC
Pas d'envois - enlèvement sur place
échange possible contre ampli intégré Denon de même valeur. (si possible AVR-4810 à négocier)